Add-on Cards
-
Vantec
M.2 NVMe + M.2 SATA SSD PCIe x4 Adapter
- Support 2 x M.2 interface, One for NVMe SSD and One for SATA SSD
- Primary M.2 for PCIe based (NVMe or AHCI) SSD to PCIe x4 slot
- Secondary M.2 for SATA SSD to the System main board SATA port
- PCIE to M.2 SSD (M-Key), SATA to M.2 SSD (B-Key)
- Support different length M.2 (NGFF) card, 22x42mm, 22x60mm or 22x80mm
- Adapter supports PCI Express v3.0 Specs and compatible with v2.0 / v1.0
- Supports system boards with PCIe x4,x8,x16 slots
- Uses minimum power from PCIe 3.3V for better power management
- Low Profile Bracket included
-
Vantec
M.2 NVMe SSD PCIe x4 Adapter
- Support M.2 (NGFF) PCIe based (NVMe or AHCI) SSD to PCIe x4 slot
- Support M.2 interface with M key, do not support M+B key
- Support different length M.2 (NGFF) card, 22x42mm, 22x60mm or 22x80mm
- Adapter supports PCI Express v3.0 Specs and compatible with v2.0 / v1.0
- Supports system boards with PCIe x4,x8,x16 slots
- Uses minimum power from PCIe 3.3V for better power management
- Low Profile Bracket included
-
Vantec
4 Channel 6-Port SATA 6Gb/s PCIe RAID Host Card
- PCIe v2.0
- Drive Capacity: 8TB Hard Drive
- 4 x Internal SATA III, 6Gb/s Ports (Backward Compatible with SATA II/I)
- 2 x External SATA (eSATA) Ports
- Requirement : Windows® XP/Vista/7/8/10 and Server 2008 R2 , PCI Express x4, x8 or x16 slot
-
Vantec
3 Port USB3.0 Type A & C PCI Express Card (UGT-PC331AC)
- USB 3.0 Type-A x2, USB 3.0 Type-C x1
- Single-lane (x1) PCI Express throughput rates up to 5 Gbps
- SATA power connector
- Supports the following USB speed: 5GBps, 480Mbps, 12Mbps and 1.5Mbps
- Hot-swapping feature
-
Vantec
2 Port USB3.1 Type-A & C PCI Express Card (UGT-PC371AC)
- PCI Express Gen2 x 2 with clocking speed up to 10Gbps
- Half height PCI_E Gen2 x 4 add on card with 2 port USB 3.1 interface
- Chipset ASMedia ASM1142, PCI Express to USB 3.1 host controller
-
Vantec
2 Port USB3.1 Gen II PCI Express Card (UGT-PC370A)
- SuperSpeed Plus USB 3.1 Gen II up to 10 Gbps connection to give you the Maximum Speed
- Full height PCI_E Gen2 x 4 add on card with 2 port USB 3.1 interface
- Compliant to Universal Serial Bus 3.1 specification Revision 1.0
- 2 X USB 3.1 Type A ports
- SATA power or 4-pin Berg power connector
-
Vantec
eSATA & SATA2 PCI Express Card
- 2 port SATA2
- 1 x external eSATA
- 1 x internal SATA2
- Silicon Image Sil3112
- Supports LCQ & NCQ
- Extra low-profile