MyGate
Powered By RetailConnection SA
Visit NIVO Interactive Shopping on ShopMania
FREE SHIPPING
 


Aruba 2530 Switch Series 2530-8G 8-Port Layer 2 Managed Gigabit Switch
• 8 RJ-45 autosensing 10/100/1000 ports • 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port or as a SFP slot • 1 dual-personality (RJ-45 or USB micro-B) serial console port • Switching Capacity: 20 Gb/s • Throughput: up to 14.8 Mpps • 16K MAC Address
NIVO#: 65570Mnf.#: J9777A
Warranty: lifetime
Our price: 
R 7,499.96
 (incl. VAT)
Availability  check now   
Shipping time 2-4 business days
Shipping cost calculate
New to Online Shopping? Read our Shopping Guide.
Overview & Features top
The Aruba 2530 Switch Series provides security, reliability, and ease of use for enterprises, branch offices, and SMBs. This series of fully managed switches delivers full Layer 2 capabilities with enhanced access security, ACLs, traffic prioritization, sFlow, and IPv6 host support. Right size deployment is simple with choice of 8-, 24-, and 48-port models available with Gigabit or Fast Ethernet ports, optional PoE+, and optional 10GbE uplinks. The 2530 delivers power savings with fanless models, Energy Efficient Ethernet, ability to disable LEDs and enable port low power mode. These switches provide consistent wired/wireless user experience with unified management tools such as ClearPass Policy Manager and Airwave Network Management.

The Aruba 2530 Switch Series offers uplink flexibility with either four Gigabit or two 10 Gigabit Ethernet uplinks on some 24- and 48-port models. The Gigabit 24- and 48-port models have either two small form-factor pluggable plus (SFP+) or four small form-factor pluggable (SFP) slots for fiber connectivity. The Fast Ethernet 24- and 48-port models have two SFPs and two RJ-45 Gigabit uplinks. The compact and fan-less 8-port switches offer additional flexibility with two dual-personality ports that can be used as either RJ-45 Gigabit Ethernet or SFP ports. The PoE+ switch models are IEEE 802.3af- and IEEE 802.3at-compliant with up to 30 W per port, making them suitable for voice, video, or wireless deployments with PoE+

Features and benefits

Unified Wired and Wireless

New ClearPass Policy Manager

Support unified wired and wireless policies using Aruba ClearPass Policy Manager

HTTP redirect function

Supports HPE Intelligent Management Center (IMC) bring your own device (BYOD) solution

Switch auto-configuration

Automatically configures switch for different settings such as VLAN, CoS, PoE max power, and PoE priority when Aruba AP is detected

New User Role

A set of switch-based policies in areas such as security, authentication, and QoS. A User Role can be assigned to a group of users or devices, using switch configuration or ClearPass (YA version software only)

Quality of Service (QoS)

Traffic prioritization (IEEE 802.1p)

Allows real-time traffic classification with support for eight priority levels mapped to either two or four queues, and uses weighted deficit round robin (WDRR) or strict priority

Simplified quality of service (QoS) configuration

  • Port-based - Prioritizes traffic by specifying a port and priority level
  • VLAN-based - Prioritizes traffic by specifying a VLAN and priority level

Class of Service (CoS)

Sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ

Rate limiting

Establishes per-port ingress-enforced maximums for all ingressed traffic or for broadcast, multicast, or unknown destination traffic

Layer 4 prioritization

Enables prioritization based on TCP/UDP port numbers

Flow control

Helps deliver reliable communication during full-duplex operation

Management

New Zero-Touch ProVisioning (ZTP)

Uses settings in DHCP to enable ZTP with Aruba AirWave Network Management

Choice of management interfaces

  • HTML-based easy-to-use Web GUI - Allows configuration of the switch from any Web browser
  • Robust CLI - Provides advanced configuration and diagnostics
  • Simple network management protocol (SNMPv1/v2c/v3) - Allows the switch to be managed with a variety of third-party network management
applications

Virtual stacking

Provides single IP address management for up to 16 switches

sFlow (RFC 3176)

Delivers wire-speed traffic accounting and monitoring, configured by SNMP and CLI with three terminal encrypted receivers

IEEE 802.1AB Link Layer Discovery Protocol (LLDP)

Automates device discovery protocol for easy mapping by network management applications

Logging

Provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce the number of log events generated

Port mirroring

Provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events

Find, fix, and inform

Finds and fixes common network problems automatically, and then informs the administrator

Friendly port names

Allows assignment of descriptive names to ports

Dual flash images

Provides independent primary and secondary operating system files for backup while upgrading

Multiple configuration files

Are easily stored with a flash image

Front-panel LEDs

  • Locator LEDs - Allows users to set the locator LED on a specific switch to turn on, blink, or turn off; and simplifies troubleshooting by making it easy to locate a particular switch within a rack of similar switches
  • Per-port LEDs - Provides an at-a-glance view of the status, activity, speed, and full-duplex operation
  • Power and fault LEDs - Display issues, if any

HPE Comware CLI

  • Comware-compatible CLI - Bridges the experience of HPE Comware CLI users who are using the HPE ProVision software CLI
  • Display and fundamental Comware CLI commands - Are embedded in the switch CLI as native commands; display output is formatted as on Comware-based switches, and fundamental commands provide a Comware-familiar initial switch setup
  • Configuration Comware CLI commands - When Comware commands are entered, CLI helps elicit to formulate the correct ProVision
software CLI command

Download software via DHCP

Adds the option to specify the location of switch software via DHCP

TR-069 support

Enables zero-touch configuration for switches

Connectivity

IPv6

  • IPv6 host - Allows the switch to be deployed and managed at the edge of an IPv6 network
  • Dual stack (IPv4/IPv6) - Supports connectivity for both protocols; provides a transition mechanism from IPv4 to IPv6
  • MLD snooping - Forwards IPv6 multicast traffic to appropriate interface; prevents IPv6 multicast traffic from flooding the network
  • IPv6 ACL/QoS - Supports ACL and QoS for IPv6 network traffic on Gigabit and 48 port 10/100 models
  • Security - RA Guard, DHCPv6 Protection, Dynamic IPv6 Lockdown (YA version software only)

IEEE 802.3af Power over Ethernet (PoE)

Provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras

IEEE 802.3at PoE+

Provides up to 30 W per port to IEEE 802.3 for PoE/PoE+-powered devices such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/tilt/zoom security cameras (refer to the product specifications for the total PoE power availability)

Auto-MDIX

Adjusts automatically for straight-through or crossover cables on all ports

Pre-standard PoE support

Detects and provides power to pre-standard PoE devices (refer to the list of supported devices in the product FAQs, which can be accessed at hpe.com/networking/support)

SFP slots

Provides fiber connectivity such as Gigabit-SX, LX, LH, and BX with four SFP slots on all 24- and 48-port Gigabit Ethernet models. Fast Ethernet 24- and 48-port models have two SFP slots and two RJ-45 Gigabit uplinks; 8-port models have two dual-personality ports supporting either SFP or RJ-45 Gigabit uplinks

Dual-personality (RJ-45 or USB micro-B) serial console port

Gives easy access to switch CLI with front-of-switch location and the flexibility of using either an RJ-45 or USB micro-B serial console port

Layer 2 switching

VLANs

Provides support for 512 VLANs and 4,094 VLAN IDs

Jumbo packet support

Supports up to 9,220-byte frame size to improve the performance of large data transfers; 8- and 24-port Fast Ethernet models automatically support up to 2,000-byte frames with no configuration needed

16K MAC address table

Provides access to many Layer 2 devices

GARP VLAN Registration Protocol

Allows automatic learning and dynamic assignment of VLANs

Rapid Per-VLAN Spanning Tree (RPVST+)

Allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+

Security

ACLs

Accommodates IPv4/IPv6 port and VLAN-based ACLs (IPv6 ACL is supported only on Gigabit Ethernet and 48-port models.)

Source-port filtering

Allows only specified ports to communicate with each other

RADIUS/TACACS+

Eases switch management security administration by using a password authentication server

Secure Sockets Layer (SSL)

Encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch

Port security

Allows access only to specified MAC addresses, which can be learned or specified by the administrator

MAC address lockout

Prevents particular configured MAC addresses from connecting to the network

Multiple user authentication methods

  • IEEE 802.1X - Uses an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server to authenticate in accordance with industry standards
  • Web-based authentication - Provides a browser-based environment, similar to IEEE 802.1X, to authenticate clients that do not support the IEEE 802.1X supplicant
  • MAC-based authentication - Authenticates the client with the RADIUS server based on the client’s MAC address

Secure shell (SSH) v2

Encrypts all transmitted data for safe remote CLI access over IP networks

Secure shell

Encrypts all transmitted data for safe remote CLI access over IP networks

STP BPDU port protection

Blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks

STP root guard

Protects the root bridge from malicious attacks or configuration mistakes

Secure management access

Delivers protected encryption of all access methods (CLI, GUI, or MIB) through SSHv2 and SNMPv3

Custom banner

Displays security policy when users log in to the switch

Secure FTP

Allows safe file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file

Protected ports CLI

Offers intuitive CLI to configure the source-port filter feature, by allowing specified ports to be isolated from all other ports on the switch; the protected port or ports can communicate only with the uplink or shared resources

Authentication flexibility

  • Multiple IEEE 802.1X users per port - Provides authentication for up to 32 IEEE 802.1X users per port; prevents a user from “piggybacking” on another user’s IEEE 802.1X authentication
  • Concurrent IEEE 802.1X and Web or MAC authentication schemes per port - Allows a switch port to accept any IEEE 802.1X and either Web or MAC authentications

Switch management logon security

Helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authentication

DHCP protection

Blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks

Dynamic ARP protection

Blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data

Dynamic IP lockdown

Works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address spoofing

Convergence

IEEE 802.1AB Link Layer Discovery Protocol (LLDP)

Facilitates easy mapping using network management applications with LLDP automated device discovery protocol

LLDP-MED (Media Endpoint Discovery)

Defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones

IP multicast (data-driven IGMP)

Prevents flooding of IP multicast traffic

PoE and PoE+ allocations

Support multiple methods—automatic, IEEE 802.3at dynamic, LLDP-MED fine grain, IEEE 802.3af device class, or user specified—to allocate and manage PoE/PoE+ power for more efficient energy use

Voice VLAN

Uses LLDP-MED to automatically configure a VLAN for IP phones

IP multicast (data-driven IGMPv3)

Prevents flooding of IP multicast traffic

LLDP-CDP compatibility

Receives and recognizes CDP packets from Cisco’s IP phones for seamless interoperation

Local MAC Authentication

Assigns attributes such as VLAN and QoS using locally configured profile that can be a list of MAC prefixes Unified Wired and Wireless

HTTP redirect function

Supports HPE Intelligent Management Center (IMC) bring your own device (BYOD) solution

Resiliency and high availability

Port trunking and link aggregation

  • Trunking - Supports up to eight links per trunk to increase bandwidth and create redundant connections; and supports L2, L3, and L4 trunk load-balancing algorithm (L4 trunk load balancing is supported only on Gigabit Ethernet and 48-port models.)
  • IEEE 802.3ad Link Aggregation Control Protocol (LACP) - Eases configuration of trunks through automatic configuration

IEEE 802.1s Multiple Spanning Tree

Provides high link availability in multiple VLAN environments by allowing multiple spanningtrees; provides legacy support for IEEE 802.1d and IEEE 802.1w

SmartLink

Provides easy-to-configure link redundancy of active and standby links

Product architecture

Energy-efficient design

  • IEEE 802.3az - Reduces power consumption during periods of low data activity on Gigabit Ethernet switches
  • Port low-power mode - Enables the port to automatically go into low-power mode to conserve energy when no link is detected
  • Fan-less and variable-speed fans - Decreases power consumption in fan-less (all 8-port, 2530-24, and 2530-48 PoE+ switches) as well as variable-speed fan switches
  • Port LEDs - Conserves energy by optionally turning off port link and activity LEDs

Switch on a chip

Provides a highly integrated, high-performance switch design with a nonblocking architecture

Flexibility

Flexible mounting

  • Rack mountable - Allows the switch to be mounted on a standard 19-inch rack, with the hardware included
  • Wall mountable - Allows the switch to be mounted on a wall, using the hardware included
  • Surface mountable - Allows the switch to be mounted above or below a surface (such as a desk or table), using the hardware included

Quiet operation

Lowers noise, making it suitable for deployments in acoustically sensitive environments such as conference rooms and office spaces

Compact size

Reduces space requirements (refer to the product specifications for the exact dimensions)
Specification top
General
Product Type
Switch
Usage
Office
Speed
Gigabit
Form Factor
Desktop/Rackmount
Wall-Mountable
Management Type
Managed
Supported Standards
EEE 802.1p
IEEE 802.1AB
IEEE 802.1X
IEEE 802.1s
IEEE 802.3ad
IEEE 802.3az
Features
Auto-MDIX
Layer 4 prioritization
Port mirroring
RADIUS/TACACS+
Rapid Per -VLAN Spanning Tree (RPVST+)
Remote monitoring (RMON)
SNMP v1/v2c/v3
Secure Sockets Layer (SSL)
Zero Touch ProVisioning (ZTP)
 
Ports
Port Type
Gigabit LAN
Total Ports
11
Gigabit RJ45 Ports
8
Gigabit SFP Ports
2
Console Port
1
 
Performance
Switching Method
Store-and-Forward
Switching Capacity
20 Gbps
MAC Address Table
16 K
 
Physical Specification
Height
160 mm
Depth
45 mm
Width
254 mm
Weight
910 grams
 
Customer Reviews top
Be the first to Review this Product